Imodyuli yokufunda ye-CR013 PLUS HF RFID TYPE-AB

Uyilo lwekhompyutha (RISC) oluncitshisiweyo olune-32-bit

I-On-chip, ii-16K Bytes zememori yokufikelela ngokungacwangciswanga (i-SRAM):

I-byte yomjikelo omnye, i-half-word (16-bit), kunye ne-word (32-bit) ifunda kwaye ibhale

Imemori ye-On-Chip: Iimveliso zethu zidibanisa ii-bytes ezili-16K zememori yokufunda emileyo (i-ROM) ngqo kwi-chip. Ibonelela ngokufikelela kokufunda okusebenzayo kunye nokusebenza kwe-byte, i-halfword (i-16-bit) kunye ne-word (i-32-bit). Ukongeza, ibandakanya ii-bytes ezingama-256K zememori ye-flash efakwe kwi-embedded (i-EFLASH) yokugcina kunye nokubuyisa idatha.

Ii-USB Controllers: Ii-USB controllers zethu zenzelwe ukuthobela umgangatho we-USB 2.0. Ine-PHY block edibeneyo ukuqinisekisa unxibelelwano olungenamthungo nezixhobo ze-USB. Iqinisekisiwe ukuba isebenza ngesantya esiphezulu (480MHz) kunye nesantya esiphezulu (12MHz). I-interface ye-UTMI+ level 2 transceiver yenza kube lula ukudluliselwa kwedatha kwaye ixhasa iindawo ezisibhozo zokudlulisa/zokufumana (ep0, ep1, ep2, ep3, ep4, ep5, ep6, ep7).

Ukufikelela kumakhadi e-Ultragith® C, MIFARE Plus®: Iimveliso zethu zibonelela ngokufikelela ngokukhawuleza nangokukhuselekileyo kumakhadi e-Ultragith® C kunye ne-MIFARE Plus®. Ixhasa ii-algorithms ze-AES, RSA, DES kunye nezinye iindlela zokubethela ukuqinisekisa ukhuseleko oluthembekileyo lwedatha ebucayi. Ukudluliselwa kwedatha kuyakhawuleza kwaye kuthembekile ngenxa yetekhnoloji yeJet Fast. Ii-IC ze-NXP RC522 okanye i-RC523 zokufunda amakhadi ziyahambelana namakhadi e-TYPE A kunye ne-Type A kunye ne-TYPE B, zibonelela ngokuguquguquka kokuhambelana kwekhadi.

iindawo zokugqibela(ep0,ep1,ep2,ep3,ep4,ep5,ep6,ep7)

Aes, RSA, Des Jet Fast ukutyelela amakhadi e-Ultralgith® C, MIFARE Plus®

I-NXP RC522 okanye i-RC523 Reader IC, ixhasa i-TYPE A okanye i-TypeA kunye ne-TYPE B